The Sani-Loo® Onboard Sewage Treatment System has been designed for reliability as well as economy. This unit complies with all Australian government requirements.
It measures only 385x235x360mm so it will fit in most boats and the moulded seamless tanks are made of marine-grade polyethylene to Australian Standard AS3542-1196 for a lifetime of problem-free service. It comes with a 12-month warranty and the poly tank has a five-year warranty.
Available Fittings.
All products listed below are available from Sani-Loo please contact us for further information on any product listed below.
Ball Valves
These ball valves are IMCI approved to ISO standard 9093-2 and are ideal for controlling inlet and outlet water requirements.
The shells of these valves are moulded in a glass reinforced nylon composite material providing high impact and tensile strength, resulting in a light weight unit, free from corrosion and electrolysis. The internal workings are moulded in a Teflon enhanced polymer for a smooth action, also ensuring continuous ease of operation over many years.
Position Monitored Ball Valves
Position Monitored Ball Valves are fitted with sensors, which enable remote indication of the valve as to whether it is in the closed or open position.
These valves can be easily wired to the engine ignition switch to enable startup to only occur when the water intake valve is open – helping to avoid possible engine overheating caused by accidental or inadvertent water intake closure.
Our valves coupled with a Seacock Monitor enables display monitoring of the status of all the seacocks on a vessel. This does away with the hassle of obtaining visual confirmation of seacocks mounted in inaccessible areas.
As with many of our products, these valves are IMCI approved to ISO standard 9093-2
Vented Loops
This 12 Volt Solenoid activated Vented Loop is designed to be fitted into the intake pipe for a Electric Toilet and wired to the Toilet operating switch. When the toilet pump is operated water is sucked in through this intake pipe and the solenoit shuts off during this proces to allow maximum intake flow. When the toilet pump is stopped the solenoid opens to then act as a syphon break to stop water syphoning back into the toilet system the same way that a manual vented loop operates.
Available in White only
Y Pieces
Y Pieces are available in a variety of sizes to allow 25mm and 38mm drain hoses to branch into one line. Manufactured in Glass Reinforced Nylon 6 Polymer, they are extremely tough and will handle both hot and cold water.
Reducers
A range of reducers to connect different sized hoses.
Available in 6 sizes, white only :
Cat No. 1399A - Reducer 19mm -> 13mm
Cat No. 1399B - Reducer 19mm -> 16mm
Cat No. 1399C - Reducer 25mm -> 19mm
Cat No. 1399D - Reducer 32mm -> 25mm
Cat No. 1399E - Reducer 38mm -> 25mm
Cat No 1399F - Reducer 38mm -> 32mm
Connectors
Hose Connectors to join 38mm,32mm, 25mm, 19mm and 13mm hose sizes.
Manufactured from a glass reinforced nylon composite material (as are a significant proportion of our products) these connectors display high strength and high durability.
Available in 5 sizes, and in black only :
Cat No. 1401A - 13mm -> 13mm (½")
Cat No. 1401B - 19mm -> 19mm (¾")
Cat No. 1401C - 25mm -> 25mm (1")
Cat No 1401D - 32mm ->32mm (1¼")
Cat No. 1401E - 38mm -> 38mm (1 ½")
Skin Fittings Above Water
This range of Above Water Skin Fittings (aswell as below water) are the only plastic skin fittings to be certified by the International Marine Certification Institute (IMCI) in Belgium.
The ISO 9093-2 Certification was gained after exhaustive testing was carried out inaccordance with the IMCI.
Designed and manufactured in New Zealand , our skin fittings are manufactured in a special grade of glass reinforced Nylon composite, resulting in a quality product with high impact and tensile strength.
Above Water Skin Fittings available in white only.
Cat No 1289A - ½" BSP 13mm Tail New July 09
Cat No. 1289B - ¾" BSP 19mm Tail
Cat No. 1289C - 1" BSP 25mm Tail
Cat No. 1289D - 1" BSP 28mm Tail
Cat No. 1289E - 1¼"BSP 32mm Tail
Cat No. 1289F - 1½"BSP 38mm Tail
Cat No 1289G - 2" BSP 50mm Tail New July 09
Features :
- Use of the unique grade of glass reinforced Nylon composite provides high impact and tensile strength.
- All our skin fittings are supplied with a Nylon washer to increase locknut support on through hull assembly.
- The use of glass reinforced Nylon skin fittings eliminates corrosion, and avoids electrolysis problems.
Skin Fittings Below Water
Below Water Skin Fittings available in both black and white.
Cat No 1253A - 1/2" BSP 12mm ID New July 09
Cat No. 1253B - ¾" BSP 19mm ID
Cat No. 1253C - 1" BSP 24mm ID
Cat No. 1253D - 1¼"BSP 31.5mm ID
Cat No. 1253E - 1½"BSP 37mm ID
Cat No. 1253F - 2" BSP 48mm ID
Features :
- Use of the unique grade of glass reinforced Nylon composite provides high impact and tensile strength.
- All our skin fittings are supplied with a Nylon washer to increase locknut support on through hull assembly.
- The use of glass reinforced Nylon skin fittings eliminates corrosion, and avoids electrolysis problems.
The Aqua Alarm Range
The aqualarm system provides early warning when a Marine Sewage Holding Tank is nearly full. The system is comprised of a panel indicator and sensor switch.
Features :
- The System is designed to operate on 12 volt DC
- Comprehensive installation instructions
- Stainless Steel fastenings
- Internal wire tinned against corrosion
- Full service and parts backup
- two panel installation options; surface mount and a recessed units available
