The Sani-Loo® Onboard Sewage Treatment System has been designed for reliability as well as economy. This unit complies with all Australian government requirements.
It measures only 385x235x360mm so it will fit in most boats and the moulded seamless tanks are made of marine-grade polyethylene to Australian Standard AS3542-1196 for a lifetime of problem-free service. It comes with a 12-month warranty and the poly tank has a five-year warranty.
Models
Grades of Treatment
Australia - Grade 'C'
USA - Type '1'
Marpol - Macerated and Disinfectant System.
T-FH
T-FH-12-2525-P 12 volt 25mm Inlet 25mm Outlet Pipes
T-FH-24-2525-P 24 Volt 25mm Inlet 25mm Outlet Pipes
TFH Models fit the following Toilet Models
- TMC - All Models
- Jabsco 3700 Models
- Raritan Sea Era
- Sealand Vacuum Toilet
- Lavac (Electric only models)
- TFH Models will fit any electric toilet that has the macerator pump and waste pump on the same shaft
- TFH Models can be configured to pump out holding tanks which contain macerated sewage.
AQT
AQT-FH-12-2525-P 12 volt 25mm Inlet 25mm Outlet Pipes
AQT-FH-24-2525-P 24 Volt 25mm Inlet 25mm Outlet Pipes
AQT Models fit the following Toilet Models
- Johnson Aqua 'T' Toilets
- Jabsco 37275 Model
- AQT Models can be fitted to most toilets that have a seperate water pump or solenoid to supply water.
XP
XP-FH-12-2525-P 12 volt 25mm Inlet 25mm Outlet Pipes
XP-FH-24-2525-P 24 Volt 25mm Inlet 25mm Outlet Pipes
XP Models have a flush mounted touch pad and has an automatic Fill-Flush-Fill cycle. These models are totally programmable from the touch pad. When the AUTO button is pushed the XP model will put water into the bowl (to soak up toilet paper), pause for two seconds, then empty the bowl, pause for another two seconds, then put water back into the bowl to make a water seal.
The XP models 3 stages can all be programmed to run from one second to twenty seconds.
The chemical dosing pump can also be controlled so every brand of toilet, whether it is below the water line or on the bridge or deck, ensures the correct amount of chemical is injected on each flush cycle.
XP models can be fitted to the same model toilets as the AQT, plus all TECMA models (NB TECMA toilets must have their discharge pipe reduced from 38mm to 25mm at the toilet.)
A1
SL-A1-24/240
Grades of Treatment
Australia Grade "A"
USA Type "II"
Marpol - New 2010 Regulation MEPC.159(55)
The Sani-Loo A1 Model is to be launched June 2010.
Please Click the image below to see the image in a seperate window.
